MacIPX expects to find the file "^0" in a different location. Please move the file "^1" from the System folder to the Extensions folder.
Existing MacIPX services may not function properly due to a change in the IPX interface.
The currently selected IPX interface could not be found. Please select an available IPX interface.
^0 could not be selected as an IPX interface due to error: ^1. Please configure the ^2 interface to ensure that the MacIPX driver can open properly.
Closing the IPX driver.
Opening the IPX driver.
Switching the IPX interface.
Fatal error ^0 occurred. You must restart your Macintosh to run any MacIPX application.
The currently specified value is either less than 576 or greater than ^0, the network MTU. Maximum Network Packet Size will be reset to the network MTU.
The IPX interface for ^0 could not restore the previous settings. The new settings will remain in effect.
Warning: Incautious changes to these parameters, which are described in the MacIPX documentation, can adversely affect network performance. Do you really want to make these changes now?
The IPX interface for ^0 could not be reinitialized due to error: ^1. Please configure the ^2 interface to ensure that the MacIPX driver can open properly.
The IPX interface could not be switched to ^0 due to error: ^1. Please configure the ^2 interface to ensure that the MacIPX driver can open properly.
The MacIPX Control Panel could not save the updated configuration due to this error: ^0.
Error(s) occurred while extracting information from one (or more) network interface file(s). The configuration may be incorrect or the file(s) may be damaged.
The MacIPX Control Panel was unable to display some of the available IPX interfaces because not enough memory is available.
The MacIPX Control Panel cannot be opened due to an error.
